Coagulants and Flocculants

Coagulants and Flocculants

by cwater

Coagulation and flocculation are an essential part of raw water treatment as well as wastewater treatment.

Coagulants are used in the pre-treatment stage to reduce the turbidity of inlet raw water so as to make it easier to treat further before its use in any industry or for municipal supply.

In wastewater treatment, coagulants and flocculants chemically enhance primary treatment to reduce suspended solids and organic loads from primary clarifiers. This stage combined with secondary treatment helps in achieving treated water quality that is easier to reuse or to meet discharge norms with minimal further treatment.

We offer a range of anionic, cationic, and non-ionic polyelectrolytes for treatment of raw water and wastewater as well as for de-watering of sludge generated from the effluent treatment plant.

Our coagulants and flocculants are used across sectors such as Textile, Steel, Mining, Paper, Electroplating, Dairy, Food, Hotels, Municipal, to name a few.

Textile Industry Products

Textile wastewater contains dyes in combination with a variety of contaminants. As environmental legislation requires textile mills to treat their effluent to meet discharge limits, coagulation and flocculation play a vital role in helping the mills meet this requirement.

Watch the video to see Kem Fix DC 400, Kem Fix DC 500 and Kem Floc 6294 in a lab test

Kem Fix DC 400

Kem Fix DC 400 is an organic coagulant based on quaternary ammonium polymer. It is particularly effective for decolorization of effluent wastewater containing acid and disperse dyes. COD reduction is obtained as a result of the settling that takes place post treatment.

Download the Kem Fix DC 400 Product Data Sheet

Kem Fix DC 500

Kem Fix DC 500 is an organic, biodegradable cationic polymer that is highly effective at coagulating highly coloured wastewater in textile and dyes industry. Charge neutralisation occurs at colloidal and suspended particles which tends to eliminate colour, COD and TSS.

Download the Kem Fix DC 500 Product Data Sheet

Kem Floc 6294

Kem Floc 6294 is a synthetic, medium molecular weight anionic powder flocculant. It has been specifically developed for solid-liquid separation in raw water and wastewater applications. It accelerates the sedimentation rate resulting in rapid dewatering in high sheared applications.

Download the Kem Floc 6294 Product Data Sheet

Steel Industry Products

Steel manufacturing consumes large volumes of water across various processes and also generates wastewater containing salts, suspended solids, organic and inorganic compounds, among other contaminants. Chembond’s coagulants and flocculants play a crucial role in the treatment of this wastewater and in rendering it suitable for reuse. This not only reduces the ecological footprint of the industry but saves operating costs.

Watch the performance of our Kemfix DC coagulant and Kemfloc flocculant in a lab test

Kemfix DC 496

Kemfix DC 496 is a cationic coagulant based on quaternary polymeric compounds. It is extremely effective at reducing Turbidity, Oil and Grease, and COD. The product has successfully been used to replace PAC and Alum partially or fully in water treatment applications.

Download the Kemfix DC 496 Product Data Sheet

Kemfloc 5276

Kemfloc 5276 is a high molecular weight synthetic flocculant based on a co-polymer of acrylamide and sodium acrylate. It has been extensively used in conjunction with a compatible coagulant in water treatment and in water-based process applications for solid-liquid separation.

Download the Kemfloc 5276 Product Data Sheet